Horje
Exploring Adaptive Filtering in Neural Networks

Adaptive filtering is a critical concept in neural networks, particularly in the context of signal processing, control systems, and error cancellation. This article delves into the adaptive filtering problem, its mathematical formulation, and the various techniques used to address it, with a focus on neural networks.

Table of Content

Introduction to Adaptive Filtering

Adaptive filtering involves designing a filter that can adjust its parameters automatically to minimize a certain error criterion. This is particularly useful in scenarios where the system dynamics are unknown or changing over time. The primary goal is to make the filter adapt to the environment and improve its performance based on the input-output data it receives.

Key Concepts:

  • Neural Networks: Specifically, we often use adaptive algorithms within the framework of neural networks, particularly with architectures like feedforward networks or recurrent neural networks (RNNs).
  • Learning Algorithms: Techniques such as Gradient Descent, Backpropagation, and more sophisticated variations like the Least Mean Squares (LMS) or Recursive Least Squares (RLS) algorithms are used for adjusting the weights.

Adaptive Filtering Problem : Mathematical Formulation

Consider a dynamical system with an unknown mathematical characterization. The system’s behavior is described by a set of labeled input-output data generated at discrete time intervals. Specifically, when an m-dimensional stimulus x(i) is applied across m input nodes, the system produces a scalar output d(i). The data set can be represented as:

[Tex]\mathcal{T} = \{(x(i), d(i)); i = 1, 2, \ldots, n, \ldots\} [/Tex]

where,

[Tex]x(i) = \begin{bmatrix} x_1(i) \\ x_2(i) \\ \vdots \\ x_m(i) \end{bmatrix}^\top [/Tex]

is the input vector, and d(i) is the desired response or target signal.

Least Mean Squares (LMS) Algorithm in Adaptive Filtering

The Least Mean Squares (LMS) algorithm is a widely used method for adaptive filtering in neural networks. It is employed to adjust the weights of neurons in response to input stimuli, aiming to minimize the error between the network’s output and the desired response.

  • In neural networks, LMS is often utilized in training algorithms such as gradient descent, where the network learns to approximate a target function by iteratively adjusting its weights based on the error between predicted and actual outputs.
  • The modifications proposed to enhance LMS convergence are relevant to improving the efficiency and effectiveness of adaptive filtering in neural networks, as faster convergence and reduced sensitivity to input correlation can lead to more accurate and robust models.

The LMS algorithm, while simple and robust, may suffer from slow convergence and sensitivity to input correlation matrices’ condition numbers. To address these issues, various modifications have been proposed:

  • Time-Varying Learning Rate: Utilizing a learning rate that decreases over time can enhance convergence speed.
  • Search-Then-Converge Method: This hybrid approach adjusts the learning rate based on the iteration count, enabling a balance between standard LMS behavior and stochastic optimization.

Designing an Adaptive Filter Model with a Single Linear Neuron for System Identification

The components and processes involved in the design of the multiple input – single output model using a single linear neuron with an adaptive filter.

  1. Input-Output Data: We have a dataset T\mathcal{T} containing input-output pairs, where each input stimulus x(i) is a vector with mmm elements, and the corresponding output is d(i), a scalar.
  2. Objective: Design a model of an unknown dynamical system using a single linear neuron.

Suppose we have a set of labelled input-output data generated by system at different instants of time at uniform rate. When m-dimensional stimulus [Tex]x(i) [/Tex] is applied across m input nodes, the system produces a scalar output [Tex]d(i) [/Tex], where [Tex]i = 1, 2, \ldots, n [/Tex]

Capture-1

Adaptive Filter Model

External behavior of the system is described by the data set [Tex]\mathcal{T} [/Tex][Tex]:\{x(i), d(i); i = 1, 2, \ldots, n\} [/Tex]

where

  • [Tex]x(i) = [x_1(i), x_2(i), \ldots, x_m(i)]^T [/Tex]
  • m is the dimensionality of the input space

Stimulus [Tex]x(i) [/Tex] can arise in 2 different ways:

  1. m elements of [Tex]x(i) [/Tex] originate at different points in the space
  2. m elements of [Tex]x(i) [/Tex] represent the set of present and (m-1) past values of some excitation

This process automatically adjusts the synaptic weights based on the error signal e(i). The objective is to minimize the error by updating the weights in the direction that reduces the discrepancy between the actual and desired outputs.

Adaptive Filter Algorithm:

  • Step 1: It starts with an arbitrary setting of neuron’s synaptic weights.
  • Step 2: Adjustments to the weights are made on a regular basis.
  • Step 3: Computations of adjustments are completed inside the time interval i.e. one sampling period long.
Capture

Adaptive Filter Algorithm

Adaptive filter Continuous Processes

1. Filtering process: It includes the computation of 2 signals

  • output signal [Tex]y(i) [/Tex] produced in response to the stimulus vector [Tex]x(i) [/Tex]
  • error signal [Tex]e(i) [/Tex] obtained by comparing [Tex]y(i) [/Tex] and [Tex]d(i) [/Tex], where [Tex]d(i) [/Tex] is the desired response

2. Adaptive process:This process automatically adjusts the synaptic weights based on the error signal e(i). The objective is to minimize the error by updating the weights in the direction that reduces the discrepancy between the actual and desired outputs.

Combination of these two processes makes a feedback loop acting around the neuron.

Formulas:

[Tex]y(i) = v(i) = \sum_{k=1}^n w_k(i) \cdot x_k(i) [/Tex] , because neuron is linear

This equation represents the calculation of the output signal y(i) or the induced local field v(i) by taking the dot product of the input vector x(i) and the synaptic weights w(i).

  • [Tex]v(i) [/Tex] is the induced local field
  • [Tex]y(i) = x^T(i) \cdot w(i) [/Tex]
  • [Tex]w(i) [/Tex] is the synaptic weight
  • [Tex]w(i) = [w_1(i), w_2(i), \ldots, w_m(i)]^T [/Tex]

[Tex]e(i) = d(i) – y(i) [/Tex]: This equation calculates the error signal e(i) by subtracting the actual output y(i) from the desired output d(i).

In summary, the adaptive filter continuously adjusts the synaptic weights of the neuron based on the error signal, aiming to minimize the discrepancy between the actual and desired outputs, thus improving the model’s performance over time.

Neural Network-Based Adaptive Filtering for Signal Denoising

Here’s a Python example using TensorFlow/Keras to set up and solve this problem.

Python

import numpy as np import tensorflow as tf from tensorflow.keras.models import Sequential from tensorflow.keras.layers import Dense # Generate synthetic data def generate_data(num_samples=1000, noise_factor=0.5): np.random.seed(42) t = np.linspace(0, 1, num_samples) s = np.sin(2 * np.pi * t) # Clean signal n = noise_factor * np.random.normal(size=num_samples) # Noise x = s + n # Noisy signal return x, s # Generate data x_train, s_train = generate_data(num_samples=1000) x_test, s_test = generate_data(num_samples=300) # Build the neural network model = Sequential([ Dense(64, activation='relu', input_shape=(1,)), Dense(64, activation='relu'), Dense(1) ]) # Compile the model model.compile(optimizer='adam', loss='mse') # Train the model model.fit(x_train, s_train, epochs=100, batch_size=32, validation_split=0.2) # Evaluate the model loss = model.evaluate(x_test, s_test) print(f"Test Loss: {loss}") # Predict and plot results import matplotlib.pyplot as plt s_pred = model.predict(x_test) plt.figure(figsize=(12, 6)) plt.plot(x_test, label='Noisy Signal') plt.plot(s_test, label='Clean Signal') plt.plot(s_pred, label='Predicted Clean Signal', linestyle='dashed') plt.legend() plt.show()

Output:

Epoch 1/100
25/25 [==============================] - 4s 17ms/step - loss: 0.3084 - val_loss: 0.1766
Epoch 2/100
25/25 [==============================] - 0s 5ms/step - loss: 0.1517 - val_loss: 0.2165
Epoch 3/100
25/25 [==============================] - 0s 5ms/step - loss: 0.1471 - val_loss: 0.1991
Epoch 4/100
25/25 [==============================] - 0s 5ms/step - loss: 0.1458 - val_loss: 0.2049
.
.
.
Epoch 98/100
25/25 [==============================] - 0s 3ms/step - loss: 0.1373 - val_loss: 0.2060
Epoch 99/100
25/25 [==============================] - 0s 4ms/step - loss: 0.1377 - val_loss: 0.2200
Epoch 100/100
25/25 [==============================] - 0s 3ms/step - loss: 0.1378 - val_loss: 0.2126
10/10 [==============================] - 0s 2ms/step - loss: 0.1638
Test Loss: 0.16375832259655
10/10 [==============================] - 0s 2ms/step

download-(53)

Adaptive Filtering Problem in neural networks

Applications of Adaptive Filters

Adaptive filters have a wide range of applications, including:

  • Adaptive Noise Cancelling: Removing unwanted noise from signals.
  • Acoustic Noise Control: Reducing noise in audio systems.
  • Signal Prediction: Forecasting future values of a signal.
  • Adaptive Feedback Cancellation: Eliminating feedback in communication systems.
  • Echo Cancellation: Removing echoes in telecommunication systems.

Conclusion

Adaptive filtering is a crucial technique in neural networks, enabling systems to adjust their parameters dynamically to minimize errors. The LMS algorithm and its variants, along with advanced optimization techniques like PSO, play a significant role in improving the performance of adaptive filters. These filters find applications in various fields, making them indispensable tools in modern signal processing and control systems.


 


Reffered: https://www.geeksforgeeks.org

AI ML DS

Related
Difference between Propositional and First-Order Logic and How are they used in Knowledge Representation? Difference between Propositional and First-Order Logic and How are they used in Knowledge Representation?
How to Get Rid of Multilevel Index After Using Pivot Table in Pandas How to Get Rid of Multilevel Index After Using Pivot Table in Pandas
Customizing Heatmap Colors with Matplotlib Customizing Heatmap Colors with Matplotlib
Representing Knowledge in an Uncertain Domain in AI Representing Knowledge in an Uncertain Domain in AI
How to Test if My Distribution is Multimodal in R? How to Test if My Distribution is Multimodal in R?

Type:
 Geek
Category:
 Coding
Sub Category:
 Tutorial
Uploaded by:
 Admin
Views:
 18



 

Horje