It is an electronic device used in communication like telecommunication in hardware and electronics to determine or calculate the value of the quality factor of the electrical system. It is also used in electric capacitors to measure the value of capacitance and in inductors to calculate the value of inductance. It works and runs on the principle of resonance. When the circuit is in the condition of resonance, the circuit’s impedance becomes resistive. It also measures or calculates the reactance of many unknown circuits by using the known reactance. It is also known as the Quality Factor Meter.

What is Q Meter?

The Q Meter or Quality Factor Meter is the electronic device used to calculate or measure the value of quality factors in many telecommunications, hardware, and electric engineering. This meter is based on the principle of resonance. It becomes sensitive in resonance conditions. The quality factor is the parameter that shows the relation between the storage energy and the dissipated energy. It measures the total energy dissipated by it. In the laboratory, it is used for the testing of the radiofrequency of the coils.

Formula of Quality Factor

By using Q meter to find the Quality Factor by using this formula given below:

Quality Factor (Q) = ƒ₀/Δƒ

where:

• Q is the quality factor.
• ƒ₀is the resonant frequency.
• Δƒ is the bandwidth of the circuit.

Formula for Q Meter

Here the formula for Q meter:

Q = ω₀ L R

Where:

Q = Storage Factor

L = Inductance

R = Resistance

ω₀ = Frequency at Resonance

Components of Q Meter

Here are the common components of Q Meter:

• Meter: The Quality factor meter has a simple meter to measure the ratio of voltage and current and help to measures the quality factor of the following circuit.
• Coupling Coil: It is also a important component of Q meter. It is used to give energy to the meter between circuit being tested. It also measures the quality factor by transferring sufficient energy between them.
• Detector: It is also a part of Q meter that is used to measure the quality factor across the circuit being tested and also measure the voltage across the circuit.
• Tunable Oscillator: It is used to produce the signals or frequency for the circuit and compare with the frequency of circuit that tested.
• Capacitor: It plays a crucial role to store and release the energy for circuit that tested.
• Q-Scale: It is a important measurement scale that used in Q meter, it is used to determine the quality factor of the circuit that tested. It gives a numerical value that tells the efficiency or power of the circuit.

Q Meter Circuit

The Q meter works on the principle of resonant. When the reactance ,inductance and capacitance of the circuit are of same value or magnitude, this condition of circuit is said to resonant.

It also based on the behavior of these electrical components capacitor, inductor and resistor of the resonant circuit. In above diagram we can see that capacitance(C), inductance(L) and reactance(R) all connected in the series and make LCR series circuit.

Q Meter Circuit

The capacitor and tunable oscillator are set with correct frequency for obtaining the peak value of E₀.

Now, the value of quality factor is given as:

Q _max = ω₀L/R

By using voltmeter we calculate the quality factor and voltmeter is connected to the capacitor. This is the value of Q for whole circuit.

Similarly by using the circuit of Q meter we measured the value of inductance, effective resistance, capacitance and self capacitance.

For inductance (L) = 1/4π²ƒ₀² C

For resistance (R) = ω₀ L/Q _max

Working Principle of Q Meter

The basic working principle of Q meter is the series resonant that means the condition which exists in the circuit – the inductance and the capacitance reactance are equal in magnitude and induces the energy between their electric and magnetic field respectively. Mainly it depends on the features of some components: capacitance, inductance , resistance in the series circuit.
Let’s consider these components in resonance in the series circuit:

Q Meter Circuit

At resonant frequency:

capacitance = inductance

X_C = X_L

The value of X_C and X_L = 1/2πƒ₀

Now the value of current at resonant frequency

I_{0 =} E/R = V/R

where:

V or E = Incoming Voltage

R = Reactance

The voltage E across the capacitor is given as:

E_C = I₀ X₀ = I₀ X₀ = I₀ ω_o L

Input Voltage E_C = I₀ R

E_C/E = I₀ ω₀ L/I₀ R

E_C/E = ω₀ L/R

E_C/E = Q

At resonant frequency, the incoming voltage E or V is Q times the voltage passes across the capacitor.

E = E₀Q

Now, we calculate the value of quality factor by attaching voltmeter across capacitor.

Applications of Q Meter

• It is an electronic device that used to measure the value of quality factor in many electrical circuits, radio or telecommunication circuits. It also calculate the inductance and capacitance of inductor and capacitor respectively.
• It helps to determine the accuracy and power of the many electrical devices like capacitor, inductor, etc.
• It also determine the resonant frequency of various electrical circuits which help us in determining the accuracy and power of these circuits.
• It also help in checking the accuracy of antennas and determining the performance of antenna while transmitting signals from one place to another.
• It helps many engineers and researchers to determine the accuracy, efficiency, power of various circuits in the development area.

Conclusion

Q meter is an important and useful electronic device used to calculate the quality factor as well as determine the accuracy, power as well as performance of various electrical circuits. The common components of q meter are meter, detector, tunable oscillator, q scale, coil and capacitor. It works on the principle of resonant frequency to measure the current and voltage which helps us in calculating the quality factor as well as performance. It uses in many industries as well as in telecommunication or radio systems and more.

FAQs on Q Meter

What is Q meter and mention its components?

The Q Meter or Quality Factor Meter is the electronic device that used to calculate or measure the value of quality factor in many telecommunication circuits, in hardware and in electronics engineering. This meter based on the principle of the resonance.

Components of Q meter:

• Meter
• Coupling Coil
• Detector
• Tunable Oscillator
• Capacitor
• Q scale

What is the main objective of the Q meter?

The main objective of the Q meter is to measure or calculate the value of quality factor of the electrical system. It evaluate the current and voltage of the given circuit or system to measure the quality factor. It helps to determine the accuracy and power of the many electrical devices like capacitor, inductor, etc.

Mention the various filed where we use Q meter and give two application of Q meter.

There are many field where we use the Q meter like in telecommunication or radio systems, in electrical industries, in signals transmitting, in electrical system to measure the power and accuracy of these systems.

• It helps to determine the accuracy and power of the many electrical devices like capacitor, inductor, etc.
• It also determine the resonant frequency of various electrical circuits which help us in determining the accuracy and power of these circuits.