|
|
Standard electrode potential (E°) is a measure of the tendency of a half-reaction to occur as a reduction at a standard condition. In the context of standard electrode potential, “standard conditions” refer to a set of specific conditions under which the potential is measured. It includes standard concentration of all aqueous species to be 1 mol/L, pressure to be 1 atm and temperature to be 25℃ or 298K. In this article, we will learn in detail about standard electrode potential, its formula, construction, factors affecting and applications. Table of Content What is Standard Electrode Potential?Standard electrode potential, also known as standard reduction potential, is a measure of the tendency of a half-cell to gain electrons and undergo reduction under standard conditions. In this case, the standard hydrogen electrode (SHE) is typically used as a potential reference and it is expressed in volts (V). In simpler terms, standard electrode potentials quantify how likely a species is to gain electrons and be reduced in a redox reaction. A standard condition may comprise of 25 degrees Celsius, 1 atmosphere pressure, and 1 molar for all the species present in a solution, except the H+ ions which are uniformly present at concentration of 1 molar.
Standard Electrode Potential FormulaThe standard electrode potential (E°) for a half-cell reaction can be calculated using the Nernst equation. The Nernst equation relates the standard electrode potential to the actual electrode potential under non-standard conditions. Hence, the formula for Standard Electrode Potential is given as:
Where:
Nernst EquationNernst equation is a fundamental equation in electrochemistry that relates the standard electrode potential of a cell to the actual cell potential under non-standard conditions. It is given as follows:
where:
Construction of Standard Electrode PotentialFor standard electrode potential, the Standard Hydrogen Electrode is considered as a respected reference electrode and will be taken to show the zero volts at any temperature.
Conditions for Standard Electrode PotentialsThe standard electrode potential occurs in an electrochemical cell say the temperature = 298K, pressure = 1atm, concentration = 1M. The symbol ‘Eocell’ represents the standard electrode potential of a cell. The standard electrode potential, often denoted as E°, is the measure of the tendency of a chemical species to gain or lose electrons when it is in its standard state. Here are the conditions typically associated with standard electrode potential: Standard State: The species involved in the electrode reaction must be in their standard state, which usually means that they are at 1 atmosphere pressure, at a specified temperature (often 25°C or 298 K), and in a concentration of 1 mol/L (for solutions). Concentration: The concentration of ions in solution should be 1 mol/L. This is a convention to standardize the comparison of electrode potentials. For gases, the pressure should be 1 atmosphere. Electrodes: Electrodes involved in the reaction must be inert (do not participate in the reaction) and have a known potential. For example, the standard hydrogen electrode (SHE) is often used as a reference. Temperature: The temperature should be specified, often 25°C (298 K), unless stated otherwise. This is important because electrode potentials can vary with temperature. Difference Between Electrode Potential and Standard Electrode PotentialThe difference between electrode potential and standard electrode potential is given below:
Factors Affecting Electrode PotentialsMultiple parameters may appear in the determining of standard electrode potentials. Temperature
Concentration
Pressure
Standard Electrode Potential ExampleImagine you have two metals: zinc and copper.
Now, if you connect these two metals in a solution where zinc ions are present (like zinc sulfate solution), and you let them interact through a wire, electrons will flow from zinc to copper. This is because zinc is more “eager” to lose electrons compared to copper. This flow of electrons generates electricity, and you can use it to power devices. So, in simple terms, the standard electrode potential tells you which metal is more likely to lose or gain electrons. Half Cell ReactionsElectrochemical cells rely on the same basic principle as the reactions happening on individual electrodes (half-cell reactions). These reactions involve the electrode losing or gaining electrons (oxidation or reduction). The standard potential of an electrode tells us its natural tendency to gain or lose electrons compared to a reference point. This potential helps predict the direction of the overall reaction in the cell. These cells use the combined process of oxidation and reduction (redox) to generate electricity. The voltage produced is likely linked to the movement of electrons during these reactions within the cell. The half cell reaction for a Zn-Cu cell is given as follows: Oxidation Half Cell ReactionThis occurs at anode. In this half-cell reaction, solid zinc (Zn) undergoes oxidation to form zinc ions (Zn2+(aq)) and release two electrons(2e–). The standard electrode potential associated with this half-reaction can be measured against the standard hydrogen electrode (SHE).
Reduction Half-Cell ReactionThis occurs at cathode. Here, copper ions (Cu 2+(aq)) gain two electrons (2e −) to form solid copper (Cu(s)) through reduction. The standard electrode potential of this half-reaction can also be determined relative to the SHE.
By comparing the standard electrode potentials of various half-cell reactions, we can predict the overall spontaneity of a redox reaction. In a galvanic cell, the half-cell with the more positive standard electrode potential undergoes reduction, while the half-cell with the less positive standard electrode potential undergoes oxidation. This difference in electrode potentials drives the flow of electrons through the external circuit, generating electrical energy. Applications of Standard Electrode PotentialsThe applications of standard electrode potential in various domain is mentioned below: Battery TechnologyStandard electrode potentials are crucial in designing and optimizing electrochemical cells, including batteries. The choice of electrode materials, electrolytes, and cell configurations is guided by the standard electrode potentials to achieve desired performance characteristics such as voltage, capacity, and efficiency. Corrosion PreventionStandard electrode potentials gives a key to counteracting corrosion. The execution of sacrificial anode systems is carried out by having metals with the more negative standard electrode potential coupled with the structure which has to be protected. It can then prevent or minimize corrosion. ElectroplatingElectroplating relies on standard electrode potentials to deposit a layer of metal onto a substrate for decorative or functional purposes. By selecting appropriate metal ions with suitable standard electrode potentials, electroplating processes can be tailored to achieve desired coating thickness, uniformity, and adhesion. Analytical ChemistryStandard electrode potentials are utilized in various analytical techniques, such as potentiometric titrations and electrochemical sensors. These techniques exploit changes in electrode potential to quantify analytes in solution. Significance of Standard Electrode PotentialThe standard electrode potential plays several significant roles in electrochemistry and related fields: Standardization: Standard electrode potentials provide a standardized measure of the electrochemical behavior of different species. This standardization allows for consistent comparisons and interpretations across various experimental conditions and systems Corrosion Control: Understanding the standard electrode potentials of metals helps in predicting and controlling corrosion processes. Metals with more negative standard electrode potentials are more likely to undergo corrosion when exposed to electrolytes, whereas those with more positive potentials are more corrosion-resistant. Battery Design: Developing the Battery manufacturing technologies is along the line of being the ones who can be able to control the charging and discharging ability and charging speed improvement of the battery cell as well as the safety issues by choosing the appropriate electrode materials which job is to standardize the abilities of the battery cell components. Environmental Applications: Standard electrode potentials are relevant in environmental chemistry for understanding redox reactions in natural systems, such as soil and water. They help in predicting the fate and transport of contaminants and pollutants, as well as in designing remediation strategies. ConclusionIn the conclusion, it is standard electrode potentials which form the fundamentals of electrochemistry, known as robust tools for predicting the redox reactions’ behavior. Such standard electrode potentials, which are used for reaction purposes. Also, they form the foundation for developing solutions which are applicable across a variety of fields. The wide usage of standard electrode potentials in the industrial as well as environmental studies results in the many applications of this technology namely battery technology, electroplating and environmental monitoring. Also, Check Frequently Asked Questions on Standard Electrode PotentialsWhat are standard electrode potentials?
How are standard electrode potentials measured?
What is the significance of the standard hydrogen electrode?
How do concentration changes affect electrode potentials?
How is the Nernst equation related to standard electrode potential?
|
Reffered: https://www.geeksforgeeks.org
| Class 12 |
.png){kind=small}
Type: | Geek |
Category: | Coding |
Sub Category: | Tutorial |
Uploaded by: | Admin |
Views: | 13 |